Nokia 9300 - Smartphone 80 MB User Manual

Also see for 9300 - Smartphone 80 MB: Modem Functions E-mail guide Setup instructions User guide User guide

Contents

Sending data with BluetoothCopyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred orforwarded.There can be only one active Bluetooth connection at a time.1. Open an application where the item you want to send is stored. For example, to send a photo to another device, open theImages application.2. Select the item you want to send, press Menu, and select File > Send > Via Bluetooth.3. If you have searched for Bluetooth devices earlier, a list of the devices that were found previously is shown first. You can seea device icon and the device name. To start a new search, press Search again. To interrupt the search, press Stop.4. Select the device you want to connect with, and press Select.5. If the other device requires pairing before data can be transmitted, you are asked to enter a passcode. Create your ownpasscode (1-16 characters long, numeric), and agree with the owner of the other Bluetooth device to use the same code.The passcode is used only once, and you do not have to memorize it. Devices that do not have a user interface have a presetpasscode. After pairing, the device is saved to the Paired devices page.6. When the connection has been established successfully, the note Sending... is shown.Receiving data with BluetoothIf you want to receive data using Bluetooth, set Bluetooth to be active and select the option Shown to all.When you receive data with Bluetooth from a device that is not authorized, you are first asked if you want to accept the Bluetoothmessage. If you accept, the item is placed in the Inbox folder in the Messaging application.Tip: If the received item is not in the Inbox folder, go to Desk > Office > File manager, and view the contents.Pairing with a devicePairing means authentication. Pairing with a device makes device searches quicker and easier.Go to Desk > Tools > Control panel, and select Connections > Bluetooth.To pair with a device, select the Paired devices page. Press New, then Start to start a device search. Select the device you wantto pair with, and press Pair. Enter the passcode, and press OK. If you want the other device to be authorized, press Yes. If youselect No, connection requests from the other device need to be accepted separately every time.Tip: The users of the devices using Bluetooth technology should agree together on the passcode, and use the samepasscode for both devices in order to pair them. Devices that do not have a user interface have a preset passcode.To cancel pairing, select the Paired devices page. Select the device whose pairing you want to cancel, and press Delete.To assign a short name for a paired device, select the Paired devices page. Select the device whose name you want to change,and press Edit. In the Assign short name field, you can define a short name (nickname, alias) to help you recognize a certaindevice. This name is stored in the device memory and cannot be seen by other Bluetooth device users.To set a device to be authorized or unauthorized, select the Paired devices page. Select the device, and press Edit. Move to theDevice authorised field, and select Yes. Connections between your device and the other device can be made without yourknowledge. No separate acceptance or authorization is needed. Select Yes for your own devices, for example, your PC, or devicesthat belong to someone you trust. The icon is added next to authorized devices in the list of paired devices. If you selectNo, connection requests from this device need to be accepted separately every time.To connect to a Bluetooth device, select the Paired devices page. Select the device from the list, press Edit, and press Connect.Note that this option is available only with audio devices that require a more stable Bluetooth connection, for example, Bluetoothheadsets or car kits. Such devices must support the Bluetooth 1.1 specification and Handsfree profile. To end the connection tothe selected device, press Disconnect.SIM access profileUsing a Bluetooth connection and the SIM access profile, you can access your SIM card with a compatible car kit phone. See "SIMaccess profile," p. 62.Ending a Bluetooth connectionA Bluetooth connection is disconnected automatically after sending or receiving data. Only with the PC Suite, and someenhancements such as headsets, the connection may be maintained even if it is not actively used.Checking the status of the Bluetooth connectionBluetooth is active.C o n n e c t i v i t yCopyright © 2004-2005 Nokia. All Rights Reserved. 81