Training and Vendor DevelopmentCMO Operations & LogisticsMultimedia Creation & Support CONFIDENTIAL 09.Jan.20075Service Manual N93i- RM-56/ N93i-5 RM-57 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.Approved .0MGRPage (68)UPPER BLOCK DISASSEMBLY12.1. Needed tools: a torx driver, a torque driver, a torx plus size6 bit, metal tweezers, angled tweezers, a dental pick, a flatbladed screwdriver, the SS-93, the SS-107 vacuum cap and theSRT-6.2. Remove the battery if inserted.3. Position the SS-107 on the SUB LCD WINDOW as shown. 4. Press down the lever to create vacuum in the cup.5. Carefully, pull at the grip to lift a bit the SUB LCD WINDOW. 6. Place the SS-93 between the SUB LCD WINDOW and the FLIPB-COVER and separate the parts from each other.
