Nokia Asha 200 (RM-761)Nokia Asha 201 (RM-799/RM-800)Service Manual Level 1&215 Conf idential | Copyright © 2011 Nokia | A ll rights reserved Version 1.011) Protect the DISPLAY with protective film. Unscrewthe four Torx+ size 6 screws in the order shown.12) Release the three clips holding the ENGINE BOARDwith the sharp end of the SS-93.13) Remove the ENGINE BOARD including the DISPLAYand the UI FRAME.14) Release the four clips holding the UI FRAME withthe SS-93. Be careful not to damage any componentsnearby.15) Remove the UI FRAME. 16) Open the DISPLAY connector with the SS-34 flexopening tool. Be careful not to damage theconnector.