ENGLISHGet startedThe headset contains the followingparts shown on the title page: storageslot with indicator light (1),microphone (2), mute switch (3),earpiece (4), clip (5), answer/end key(6), and charger connector (7).Before using the headset, you mustcharge the battery and pair theheadset with a compatible device.Parts of the device are magnetic. Metallicmaterials may be attracted to the device.Do not place credit cards or othermagnetic storage media near the device,because information stored on them maybe erased.Charge the batteryBefore charging the battery, carefullyread “Battery and chargerinformation”.1. Connect the charger to a walloutlet.2. Connect the charger cable to thecharger connector.The red indicator light is displayedduring charging. Charging thebattery fully may take up to 2hours.3. When the battery is fully charged,the green indicator light isdisplayed. Disconnect the chargerfrom the headset, then from thewall outlet.When you unplug a charger, holdand pull the plug, not the cord.The fully charged battery has powerfor up to 8 hours of talk time. Whenyou keep the earpiece in the storageslot, the fully charged battery haspower for up to 3 months of standbytime. When you do not keep theearpiece in the slot, the standby timeis up to 150 hours.