ENGLISHCall handlingTo make a call, use your mobile devicein the normal way when the headset isconnected to the device.If your device supports last numberredialing with the headset, press theanswer/end key twice while no call isin progress.If your device supports voice dialingwith the headset, press and hold theanswer/end key when no call inprogress, and proceed as described inthe user guide of your device.To answer or end a call, press theanswer/end key. To reject an incomingcall, press the answer/end key twice.To adjust the headset volume, pressthe volume key up or down.To mute or unmute the microphone,press the middle of the volume key.To switch the call between theheadset and a compatible device,press and hold the answer/end key.Clear settings or resetTo clear all the pairing settings fromthe headset, switch off the headset,and press and hold the power key andthe answer/end key until the red andgreen indicator lights start toalternate.To reset the headset if it stopsfunctioning, although it is charged,plug the headset into a charger, andpress the power key and the answer/end key at the same time.Battery informationYour device is powered by a rechargeablebattery. The battery can be charged anddischarged hundreds of times, but it willeventually wear out. Recharge your