Nokia BH-505 User Manual

Contents

ENGLISHPair and connect the headsetBefore using the headset, you mustpair and connect it to a compatibledevice.If your mobile device supports theA2DP Bluetooth profile and has amusic player feature, you can use thedevice to also play music through theheadset.If your mobile device does not supportthe A2DP profile, you can separatelypair the headset with the mobiledevice and a music player thatsupports this profile. If you havepaired and connected the headset toyour mobile device, disconnect theheadset from it before pairing theheadset with the music player.To pair and connect the headset toyour device if the device supports theNear Field Communication (NFC)feature, activate the feature, and useyour device to touch the area shownin figure 10 at the start of this guide.For details on NFC, see the user guideof your device.To pair and connect the headset toyour device if the device does notsupport NFC:1. Ensure that your mobile device ormusic player is switched on andthe headset is off.2. If the headset has not beenpreviously paired with a device,switch on the headset. The headsetenters pairing mode, and the blueindicator light starts to flashquickly.If the headset has been previouslypaired with a device, ensure thatthe headset is switched off, andpress and hold the power key (forabout 8 seconds) until the blueindicator light starts to flashquickly.