Remove the batterySafe removal. Always switch the device off and disconnect the charger before removingthe battery.Charge the batteryYour battery has been partially charged at the factory. If the device indicates a lowcharge, do the following:1 Connect the charger to a wall outlet.2 Connect the charger to the device.3 When the device indicates a full charge, disconnect the charger from the device,then from the wall outlet.Tip: To save energy, unplug the charger when the battery is fully charged.You do not need to charge the battery for a specific length of time, and you can use thedevice while it is charging. If the battery is completely discharged, it may take severalminutes before the charging indicator appears on the display or before any calls can bemade.Switch on or offPress and hold the end key.Use the phone only in its normal operating position.Avoid touching the antenna area unnecessarily while the antenna is transmitting orreceiving. Contact with antennas affects the communication quality and may cause ahigher power level during operation and may reduce the battery life.Get started 5