2 Remove the back cover and battery.3 To release the memory card holder, slide the holder in the direction indicated bythe arrow on the holder. Lift the memory card holder, and remove the memory card.Charge the batteryYour battery has been partially charged at the factory, but you may need to recharge itbefore you can switch on your phone for the first time. If the phone indicates a lowcharge, do the following:1 Connect the charger to a wall outlet.2 Connect the charger to the phone.3 When the phone indicates a full charge, disconnect the charger from the phone,then from the wall outlet.You do not need to charge the battery for a specific length of time, and you can use thephone while it is charging.If the battery is completely discharged, it may take several minutes before the chargingindicator is displayed or before any calls can be made.If the battery has not been used for a long time, to begin charging, you may need toconnect the charger, then disconnect and reconnect it.8 Get started