DNS addresses — Enter the IP addresses of the primary and secondary DNS servers, ifrequired by your service provider. To obtain these addresses, contact your internetservice provider.Proxy server address — Enter the address of the proxy server.Proxy port number — Enter the port number of the proxy server.WLAN access point settingsSelect Menu > Settings and Connectivity > Destinations > Access point, and followthe instructions.Edit a wireless LAN (WLAN) access pointSelect an access point group and access point marked with . Follow the instructionsfrom your WLAN service provider.Select from the following:WLAN network name — Select Enter manually or Search for networks. If you selectan existing network, the WLAN network mode and WLAN security mode are determinedby the settings of its access point device.Network status — Define whether the network name is displayed.WLAN network mode — Select Ad-hoc to create an ad hoc network and to allowdevices to send and receive data directly; a WLAN access point device is not needed. Inan ad hoc network, all devices must use the same WLAN network name.WLAN security mode — Select the encryption used: WEP, 802.1x, orWPA/WPA2(802.1x and WPA/WPA2 are not available for ad hoc networks). If you select Opennetwork, no encryption is used. The WEP, 802.1x and WPA functions can be used onlyif the network supports them.Homepage — Enter the web address of the starting page.Use access point — Set the device to create a connection using this access pointautomatically or after confirmation.The available options may vary.Close a network connectionIf several applications are using an internet connection, you can use the Connectionmanager application to close some or all network connections.Select Menu > Settings and Connectivity > Connection mgr..In the active data connections view, you can see your current network connections.indicates a packet data connection, and indicates a wireless local area network(WLAN) connection.Connectivity 91