Enable remote locking1 Select Menu > Settings and Phone > Phone mgmt. > Security settings >Phone and SIM card > Remote phone locking > Enabled.2 Enter the text message content. It can be 5-20 characters, and both upper and lowercase letters can be used.3 Enter the same text again to verify it.4 Enter the lock code.Send the lock messageTo lock the device remotely, write the predefined text, and send it to your device as atext message.To unlock your device, you need the lock code.ConnectivityInternet connectionsDefine how your device connects to the internetYour device automatically checks for and connects to an available known network whena network connection is needed. Selection is based on the connection settings, unlessthere are application-specific settings applied.Select Menu > Settings and Connectivity > Settings.Automatically switch to a known wireless local area network (WLAN) connectionwhen availableSelect Switch to WLAN > Known WLANs only .You can also connect to WLANs manually using the WLAN wizard application.Only use a WLAN connectionFor WLAN connections when in your home network, select Data use in homenetw. > WLAN only. For WLAN connections when outside your home network, selectData use when roaming > WLAN only.Automatically use a packet data connection when in your home networkSelect Data use in home netw. > Automatic.To set the device to request confirmation before connecting, select Data use in homenetw. > Always ask.Request confirmation before using a packet data connection when outside yourhome networkSelect Data use when roaming > Always ask.100 Connectivity
