G e t s t a r t e d11• Function that can be performed by pressing the Navi wheel (5); in thestandby mode, pressing the Navi wheel opens the list of menufunctionsTo enter a phone number manually or use speed dialing, turn the Naviwheel to left.To search for a contact from Contacts in the car kit, turn the Navi wheelto right.■ Navigate the menusMany of the car kit functions are grouped into menus.To open the list of menu functions in the standby mode, press the Naviwheel when Menu is displayed at the bottom of the display.To scroll to an item (such as a menu function) or through a list, turn theNavi wheel left or right. To select the item, press the Navi wheel.To return to the previous menu level, press . To return to the standbymode, press and hold until the standby mode screen is displayed.■ Switch the car kit on or offSwitch onIf the ignition sense wire is not connected, press and hold . (Toconnect the ignition sense wire, contact your service technician.)If the ignition sense wire is connected, turn on the car ignition.When the car kit is switched on, the display and the indicator light ofthe input device turn on.Switch offIf the ignition sense wire is not connected, press and hold for 5seconds. The car kit switches off after 2 minutes. When the car kitswitches off, the display turns off. After you turn off the car ignition, donot leave the mobile device connected to the car kit to preventaccidental draining of the car battery.9200326_en1.fm Page 11 Thursday, January 25, 2007 11:09 AM