B a s i c u s e193. Basic use■ Copy contacts from connected devicesYou can copy contacts (names and phone numbers) from compatiblemobile devices that you connect to the car kit.is displayed during copying. Copying may take several minutes,depending on the number of contacts. While the contacts are beingcopied, you cannot use the car kit.Manual copyingTo manually copy contacts of the connected (primary) device if itsupports the PBAP Bluetooth profile or AT commands, in standby mode,select Menu > Settings > General > Start contact download.If your device does not support the PBAP Bluetooth profile, but itsupports the OPP Bluetooth profile, in your device, send the contacts asbusiness cards to the car kit.If you update contacts in your mobile device, you must copy thecontacts to the car kit again.Automatic copyingIf you have activated the Automatic contact download setting, the carkit automatically tries to copy the contacts from your device when thedevice connects to the car kit. To activate automatic copying, in standbymode, select Menu > Settings > General > Automatic contactdownload > on.If you have activated automatic copying, each time you connect yourdevice to the car kit, the contacts saved in the car kit are updated.■ CallsDuring a call, speak towards the display or the external microphone thatis connected to the car kit. For optimal performance, make sure thereare no objects in front of the microphone. During a call, is displayed.