Nokia CK-300 User And Installation Manual

Also see for CK-300: CarMenu User Guide Installation guidelines Quick guide and safety information Quick guide and safety information

Nokia CK-300 User And Installation Manual Manual pdf 13 page image

G e t s t a r t e d13Switch onIf the ignition sense wire is connected, turn on the car ignition. Whenthe car kit is switched on, the CarMenu application installed on yourmobile device starts up, and the indicator light of the input device turnson.If the ignition sense wire is not connected, press and hold the Naviwheel.Switch offIf the ignition sense wire is connected, turn off the car ignition. If youturn off the ignition during a call, the car kit switches off after you endthe call or disconnect the mobile device from the car kit.If the ignition sense wire is not connected, press and hold the Naviwheel until the indicator light of the input device turns off. After youturn off the car ignition, do not leave the mobile device connected tothe car kit to prevent accidental draining of the car battery.■ Pair and connect a mobile deviceYou can connect the car kit to a compatible mobile device usingBluetooth wireless technology.Bluetooth wireless technologyBluetooth wireless technology allows you to connect compatibledevices without cables. A Bluetooth connection does not require thatthe two devices be in line of sight, but the devices should be within10 meters (30 feet) of each other. The connection is subject tointerference from obstructions, such as walls, or other electronicdevices.The car kit is compliant with Bluetooth Specification 1.2 supporting thefollowing profiles: Handsfree Profile 1.5, Advanced Audio DistributionProfile (A2DP) 1.0, and Audio/Video Remote Control Profile (AVRCP) 1.0.Check with the manufacturers of other devices to determine theircompatibility with this car kit.