P u t t i n g t h e A d v a n c e d C a r K i t C K - 7 W i n t o s e r v i c e17English3. Putting the Advanced Car KitCK-7W into serviceA compatible mobile phone can be connected to the Advanced Car KitCK-7W in one of two ways: over a Bluetooth wireless connection orusing a compatible phone holder with a cable.■ Connecting a mobile phone using Bluetoothwireless technologyThe first time you establish a wireless link from your Advanced Car Kitusing Bluetooth technology, you will have to pair the handsfree unitwith the compatible mobile phone that you are using. This only needs tobe done once: after this the devices will automatically recognise eachother and establish the link.Note: If you wish to establish a connection using Bluetoothwireless technology, make sure that there is no mobile phoneinserted in the phone holder.Pairing using a Bluetooth passcode1. Make sure that the mobile phone is switched on and the battery ischarged.2. Switch on the Advanced Car Kit. For further information, see"Switching the Advanced Car Kit CK-7W on/off" on page 20.3. Open the Bluetooth menu in the mobile phone and activate theBluetooth function.4. Make the required settings on the mobile phone to activate a searchfor Bluetooth devices within range. For further information on thesettings required on your mobile phone, see the relevant user’s guide.5. Select Advanced Car Kit from the list of Bluetooth devices found.6. When prompted, key in the Bluetooth passcode 0000.7. The mobile phone has now been paired with the Advanced Car Kitand is ready for operation.