Title: uMobility User’s Guide – Nokia E-Series 3.1.23Confidential ! 2003-2009 DSM Telecom Inc. Page 7 of 23Configuring uMobility to Work with a WiFi NetworkTo use uMobility with an office, home or external WiFi network, at least one WiFi access pointmust be configured on the Nokia phone.1. Configure a WiFi access point to work with the Nokia phone:• Press the Menu key on the Nokia cell phone• Click on the Connectivity folder• Click on Conn Mgr.• Select Available WLAN Networks• Highlight the access point from the list• Click on the Options• Select Define access point• Select Yes• If requested, enter the WEP key for the defined network• Press Exit until returning to the Home Screen.To check the WiFi connectivity:• Highlight and then select the Web (Globe) icon on the Nokia tool bar below the top of theNokia screen (or, click Menu and select Web). A list of web Bookmarks is displayed.• Select the newly defined access point in Options->Settings->General->Access Point,Select User Defined, which will bring up a list of defined access points. Select the accesspoint that was just defined. Press right soft key (Back) twice to come out of settingsscreen.• Highlight and select Nokia.com• If the WiFi connection is working properly, the Nokia web site displays on the Nokiaphone’s screen• Now, click the Close option in the lower right corner of the screen to return to the Nokiahome screen2. Now that the WiFi connection has been verified the following procedure can be used to consultthe list of access points available for use by uMobility. This procedure is only needed for troubleshooting – it is presented here for consultation in the event of difficulty only.• Press and hold the Home key to display the Nokia Task List in the left corner of the Nokiascreen: