Nokia E51 User Manual

Also see for E51 - Smartphone 130 MB: User guide Specification sheet User guide User guide Brochure

Contents

Nokia E51 User Manual Manual pdf 66 page image

To create a new access point, select Options > Newaccess point or select an existing access point from thelist and then Options > Duplicate access point to usethe access point as a basis for the new one.Packet data (GPRS) settingsSelect Menu > Tools > Settings > Connection >Packet data.Your device supports packet data connections, such asGPRS in the GSM network. When you are using your devicein GSM and UMTS networks, it is possible to have multipledata connections active at the same time; access pointscan share a data connection, and data connections remainactive, for example, during voice calls. See "Connectionmanager", p. 55.To define the packet data settings, select Packet dataconnection and select When available to register thedevice to the packet data network when you switch thedevice on in a supported network, or When needed toestablish a packet data connection only when anapplication or action requires it. Select Access point andenter the access point name provided by your serviceprovider to use the device as a packet data modem to yourcomputer. To use a high-speed data connection, selectHigh speed packet access > Enabled.These settings affect all access points for packet dataconnections.WLAN settingsSelect Menu > Tools > Settings > Connection >Wireless LAN.To have an indicator displayed when there is a WLANavailable in your current location, select Show WLANavailability > Yes.To select the interval for your device to scan for availableWLANs and update the indicator, select Scan fornetworks. This setting is not available unless you selectShow WLAN availability > Yes.WLAN security settingsSelect Menu > Tools > Settings > Connection >Access points > Options > New access point, or selectan access point and Options > Edit.In the access point settings, select WLAN security modeand the desired mode.Session initiation protocol(SIP) settingsSelect Menu > Tools > Settings > Connection > SIPsettings.Session initiation protocols (SIP) are used for creating,modifying, and terminating certain types ofcommunication sessions with one or more participants(network service). Typical communication sessions arevideo sharing and net calls. SIP profiles include settings forthese sessions. The SIP profile used by default for acommunication session is underlined.To create a SIP profile, select Options > New SIPprofile > Use default profile or Use existing profile.66CyanCyan MagentaMagenta YellowYellow BlackBlackCyanCyan MagentaMagenta YellowYellow BlackBlack