• Swap — Alternate between an active and a held call (network service).• Send DTMF — Send DTMF (dual tone multi-frequency) tone strings, for example, passwords. Enter the DTMF string or searchfor it in Contacts, and select DTMF.• Transfer — Connect the held call to the active call and disconnect yourself from the call (network service).The available options may vary.Divert callsSelect Menu > Tools > Settings > Call divert.Divert incoming calls to your voice mailbox or to another phone number. For details, contact your service provider.1. Select a call type from the following:• Voice calls — Incoming voice calls.• Data and video calls — Incoming data and video calls.• Fax calls — Incoming fax calls.2. Select one of the following call diverting options:• All voice calls, All data and vid. calls, or All fax calls. — Divert all incoming voice, data and video, or fax calls.• If busy — Divert incoming calls when you have an active call.• If not answered — Divert incoming calls after your device rings for a specified period of time. Define the time you let thedevice ring before diverting the call in the Delay time: field.• If out of reach — Divert calls when the device is switched off or out of network coverage.• If not available — Activate the last three settings at the same time. This option diverts calls if your device is busy, notanswered, or out of reach.3. Select Activate.To check the current diverting status, scroll to the diverting option, and select Options > Check status.To stop diverting voice calls, scroll to the diverting option, and select Options > Cancel.Call barringCall barring and call diverting cannot be active at the same time.When calls are barred, calls still may be possible to certain official emergency numbers.Select Menu > Tools > Settings > Call barring.You can bar the calls that can be made or received with the device (network service). To change the settings, you need thebarring password from your service provider. Call barring affects all calls, including data calls.To bar calls, select Cellular call barring and select from the following options:• Outgoing calls — Prevent making voice calls with your device.• Incoming calls — Bar incoming calls.• International calls — Prevent calling to foreign countries or regions.• Incoming if abroad — Bar incoming calls when outside your home country.• Intern. except home — Prevent calls to foreign countries or regions, but to allow calls to your home country.To check the status of voice call barrings, scroll to the barring option, and select Options > Check status.To stop all voice call barrings, scroll to a barring option, and select Options > Cancel all barrings.Net call barringTo bar net calls, select Menu > Tools > Settings > Call barring > Internet call barring.To reject net calls from anonymous callers, select Anonymous calls > On.Send DTMF tonesYou can send dual tone multi-frequency (DTMF) tones during an active call to control your voice mailbox or other automatedphone services.To send a DTMF tone sequence, make a call, and wait until the other end answers. Select Menu > Options > Send DTMF. Type theDTMF tone sequence, or select a predefined sequence.To attach DTMF tone sequences to contact cards, select Menu > Contacts. Open a contact, and select Options > Edit > Options >Add detail > DTMF. Enter the tone sequence. Press * three times to insert p, a pause of about 2 seconds before or between DTMFtones. Select Done. To set the device to send the DTMF tones only after you select Send DTMF during a call, press * four times toinsert w.M a k e c a l l sCopyright © 2006 Nokia. All Rights Reserved. 34