Find helpSupportWhen you want to learn more about how to use your productor you are unsure how your device should function, go towww.nokia.com/support, or using a cellular phone,www.nokia.mobi/support. You can also select Menu >Help > Help in your device.If this does not resolve your issue, do one of the following:• Switch off the device, and remove the battery. After abouta minute, replace the battery, and switch on the device.• Restore the original factory settings.• Update your device software.If your issue remains unsolved, contact Nokia for repairoptions. Go to www.nokia.com/repair, or in Latin America,www.nokia-latinoamerica.com/centrosdeservicio. Beforesending your device for repair, always back up the data inyour device.Remote configurationSelect Menu > Tools > Device mgr..With Device manager, you can manage settings, data andsoftware on your device remotely.You can connect to a server and receive configuration settingsfor your device. You may receive server profiles and differentconfiguration settings from your service providers orcompany information management department.Configuration settings may include connection and othersettings used by different applications in your device. Theavailable options may vary.The remote configuration connection is usually started by theserver when the device settings need to be updated.To create a new server profile, select Options > New serverprofile.You may receive these settings from your service provider ina configuration message. If not, define the following:• Server name — Enter a name for the configurationserver.• Server ID — Enter the unique ID to identify theconfiguration server.• Server password — Enter a password to identify yourdevice to the server.• Session mode — Select the preferred connection type.• Access point — Select the access point to use for theconnection or create a new access point. You can alsochoose to be asked for the access point every time youstart a connection. This setting is available only if you haveselected Internet as the bearer type.• Host address — Enter the web address of theconfiguration server.• Port — Enter the port number of the server.© 2010 Nokia. All rights reserved. 9