Plan a routeTo plan a route, select your start point on the map or searchfor a location, press the scroll key and select Add to route.To define the destination and add more locations for yourroute, select Options > Add route point, and search for thelocation.To switch between walking or driving mode, selectOptions > Settings > Transport modeTo show the route on the map, select Options > Showroute.To navigate to the destination by car or on foot, if you havepurchased a license for these extra services, select Options >Start driving or Start walking .To save the route, select Options > Save route.GPS dataSelect Menu > GPS > GPS data.With GPS data, you can view your current location, find yourway to a desired location, and track distance.Select Navigation to view navigating information to yourtrip destination, Position to view positioning informationabout your current location, or Trip dist. to view yourtraveling information such as the distance and duration youhave traveled, and your average and maximum speeds.The application must receive positioning information from atleast four satellites to be used as a travelling aid.The trip meter has limited accuracy, and rounding errors mayoccur. Accuracy can also be affected by availability and qualityof GPS signals.Use GPS dataTo check the signal strength of the satellites that provide thepositioning information necessary for navigation, open anyof the three views and select Options > Satellite status.To set a landmark or location as the destination of your trip,select Navigation > Options > Set destination. You canalso enter the destination latitude and longitudecoordinates.To remove the destination set for your trip, selectNavigation > Options > Stop navigation.To save your current position as a landmark, selectNavigation or Positionand Options > Save position.To activate the trip meter, select Trip distance > Options >Start. To stop the trip meter, select Options > Stop.To reset all fields and start calculating the trip again, selectTrip distance > Options > Restart.To change the measuring system in use, select Options >Settings > Measurement system > Metric or Imperial.To enter the altitude calibration to correct the altitudereceived from the positioning satellites, select Options >Settings > Altitude calibration.www.nokia.com/support 51CyanCyan MagentaMagenta YellowYellow BlackBlack