Nokia E90 User Manual

Also see for E90 Communicator: User guide Specification sheet User guide Brochure User guide

Contents

Nokia E90 User Manual Manual pdf 20 page image

3. Transfer content between devicesSelect > Tools > Transfer.You can transfer content, such as contacts, from a compatible Nokia device to your Nokia E90 Communicator using Bluetoothconnectivity or infrared. The type of content that can be transferred depends on the device model. If the other device supportssynchronization, you can also synchronize data between the other device and your Nokia E90 Communicator.If you transfer data from your previous device, the device may require you to insert the SIM card. Your Nokia E90 Communicatordoes not need a SIM card when transferring data.Transfer data with Bluetooth1. In the information view, select Continue.2. Select Via Bluetooth. Both devices must support the selected connection type.3. Activate Bluetooth in your other device, and select Continue in your Nokia E90 Communicator to start searching for deviceswith active Bluetooth connectivity.4. Select Stop in your Nokia E90 Communicator after it has found your other device.5. Select your other device from the list. You are asked to enter a passcode (1 to 16 digits) on your Nokia E90 Communicator.The passcode is used only once to confirm this connection.6. Enter the code on your Nokia E90 Communicator, and select OK. Enter the passcode on your other device, and select OK. Thedevices are now paired. See "Pair devices" on page 45.For some phone models, the Transfer data application is sent to your other device as a message. To install Transfer data onyour other device, open the message, and follow the instructions on the display.7. From your Nokia E90 Communicator, select the content you want to transfer from your other device.Transfer data with infrared1. In the information view, select Continue.2. Select Via infrared. Both devices must support the selected connection type.3. Connect the two devices. See "Infrared " on page 47.4. From your Nokia E90 Communicator, select the content you want to transfer from your other device, and select OK.Content is copied from the memory of the other device to the corresponding location in your device. Copying time depends onthe amount of data to be transferred. You can also cancel and continue later.The necessary steps for data transfer may vary depending on your device, and whether you have interrupted data transferearlier. The items that you can transfer vary depending on the other device.Synchronize data with another deviceIf you have previously transferred data to your Nokia E90 Communicator, and your other device supports synchronization, youcan use Transfer data to keep the data in the two devices up to date.1. Select Phones.2. Select the device from which you transferred data.3. Select Phones. The devices start synchronizing using the same connection type that you selected when you originallytransferred data. Only the data that you originally selected for data transfer is synchronized.To modify the data transfer and synchronization settings, select Phones, then select the desired device, and Edit.© 2007 Nokia. All rights reserved. 20