GPS dataThis feature is not designed to support positioning requests for related calls. Contact your service provider for more informationabout how your phone complies with government regulations on location based emergency calling services.GPS should only be used as a navigation aid. It should not be used for precise location measurement and you should never relysolely on location data from the GPS receiver for positioning or navigation.Select > GPS > GPS data.With GPS data, you can view your current location, find your way to a desired location, and track distance.Select Navigation to view navigating information to your trip destination, Position to view positioning information about yourcurrent location, or Trip dist. to view your traveling information such as the distance and duration you have traveled, and youraverage and maximum speeds.The application must receive positioning information from at least three satellites to be used as a traveling aid.To select a positioning method to detect the location of your device, select Options > Positioning settings, scroll to the desiredpositioning method, and select Options > Enable.To check the signal strength of the satellites that provide the positioning information necessary for navigation, open any of thethree views and select Options > Satellite status.To set a landmark or location as the destination of your trip, select Navigation > Options > Set destination. You can also enterthe destination latitude and longitude coordinates.To remove the destination set for your trip, select Navigation > Options > Stop navigation.To save your current position as a landmark, select Navigation or Position, and Options > Save position.To activate the trip meter, select Trip dist. > Options > Start. To stop the trip meter, select Options > Stop.To reset all fields and start calculating the trip again, select Trip dist. > Options > Restart.To change the measuring system in use, select Options > Settings > Measurement system > Metric or Imperial.To enter the altitude calibration to correct the altitude received from the positioning satellites, select Options > Settings >Altitude calibration.LandmarksSelect > GPS > Landmarks.Landmarks are coordinates to geographic locations that you can save to your device for later use in different location-basedservices. You can create landmarks using the internal GPS receiver of your device or network (network service).To create a landmark, select Options > New landmark. Select Current position to make a network request for the latitude andlongitude coordinates of your current location, Use map to select the location from a map, or Enter manually to fill in necessarylocation information such as a name, category, address, latitude, longitude, and altitude.To show the landmark on the map, select Options > Show on map.Edit landmarksTo edit a landmark, select Options > Edit > Options and from the following:• Select categories — Organize the landmark to a group of similar landmarks. Select a category to modify landmark informationsuch as a name, category, address, latitude, longitude, and altitude.• Retrieve current position — Request and automatically fill in the geographical latitude and longitude coordinates to makea landmark of your current location.• Delete — Remove the landmark.• Landmark icon — Change the icon of the landmark.• Show on map — Show the landmark on the map.• Send — Send the landmark to compatible devices.• Editing options — Edit the phone numbers and URL addresses assigned to the landmark.• Writing language — Change the writing language.Landmark categoriesYou can see the landmark categories in two views: one lists categories that already contain landmarks, and the other lists allthe categories your device has.To view the landmarks that a category contains, scroll to the category, and press the scroll key.To create a new category, select Options > Edit categories > Options > New category.G l o b a l P o s i t i o n i n g S y s t e m ( G P S )© 2007 Nokia. All rights reserved. 55