G e t s t a r t e d7EnglishWhen the battery is running out of power, the headset beeps, and thered indicator light starts to flash.■ Switch the headset on or offTo switch on, press the power key for 3 seconds. The headset beeps, andthe green indicator light starts to flash quickly. The flashing is slowerafter the headset is connected to your phone.To switch off, press and hold the power key for 2 seconds. The headsetbeeps, and the red indicator light is displayed briefly.■ Pair the headset with a compatible phone1. Switch on your phone and the headset.2. Activate the Bluetooth feature on the phone, and set the phone tosearch for Bluetooth devices. See the user guide of your phone forinstructions.3. Select the headset (Nokia HS-26W) from the list of found devices.4. Enter the passcode 0000 to pair and connect the headset to yourphone. In some phones you may need to make the connectionseparately after pairing. See the user guide of your phone for details.You only need to pair the headset with your phone once.5. If the pairing was successful, the headset beeps and appears in thephone menu where you can view the currently paired Bluetoothdevices.Disconnect the headset from the phoneTo disconnect the headset from your phone (for example, to connect thephone to another Bluetooth device), do one of the following:• Switch off the headset.• Disconnect the headset in the Bluetooth menu of your phone.• Move the headset more than 10 meters (30 feet) away from thephone.You do not need to delete the pairing with the headset to disconnect it.9242672_HS26W_1_en.fm Page 7 Tuesday, August 2, 2005 1:34 PM