G e t t i n g s t a r t e d8■ Removing and installing the batteryNote: Before changing the cover, always switch off the powerand disconnect the device from the charger. Always store anduse the device with the covers attached.The headset has a rechargeable Li-Polymer battery.• Open the battery cover by gently pushing the release button andsliding the battery cover backwards, see Figure 2.1.• Remove the battery, see Figure 2.2.• Detach the connector from its space and detach the battery from theconnector, see Figure 2.3.• Replace the battery. Place the connector in the space reserved for itand set the battery in place, see Figure 2.4.• Close the battery cover, see Figure 2.5.• Make sure that the cover is properly locked in place, see Figure 2.6.