Nokia IP530 - Remote Access Server Installation Manual

Also see for IP530 - Remote Access Server: Installation guide Product guide

Contents

Nokia IP530 - Remote Access Server Installation Manual Manual pdf 7 page image

Install Coreboot on a Nokia IP530 HOWTO.5.5 Update the flash-rom.Now to flash the flash rom with the Coreboot image, use the following command:>flashrom -w [enter]Now the Flashrom program shows information about its self and continues with themessage Erasing the flash rom. And continues with programming the chip. Now the newCoreboot BIOS is in the Nokia. As an extra step you can check it with the followingcommand>flashrom -V [enter]It should tell you that the verify has completed and the images matches.In case of an error see 4.2 Problems.5.6 Rebooting the system.Now you can reboot the system by>reboot [enter]Or;>shutdown -h now [enter] and switching the power OFF and ON.Now the system should just reboot and you should be able the login to FreeBSD again.When it's booted you can setup a new Linux or other OS on a donor PC. Or when usingsgabios you should be able to use a CD-ROM on the secondary IDE controller with liveCD that supports basic text interface or even serial console. I use an image based onhttp://ciffer.net/~svend/tech/livesc/ this is a Debian based image.Page 7 of 9

/ 9

Related manuals for Nokia IP530 - Remote Access Server