Nokia IP740 - Remote Access Server Product Manual

Contents

hardware requirements

Nokia IP740 - Remote Access Server Product Manual Manual pdf 2 page image

Page 2 of 24 Nokia/CP NG Product/Config Guide pdf[Rev 2C]Hardware Requirements1) Order Base Nokia system first. (Redundant systems: order two of everything, includingsoftware except Check Point Management Console Gateway)2) Order Power Kit for Country (NCZxxxxxxx)- No charge item.3) Order Encryption Type- No charge item.4) Standard Memory: IP740 has 512MB of RAM, IP650, IP530, IP440, and IP330 have 256MBof RAM, IP120 has 128MB, and the IP110 has 64MB.5) IP740, IP650, IP530 and IP440 each come with a 4-port 10/100 c/PCI card, IP330 andIP120/IP110 come with three integrated 10/100 ports.6) WAN cables come with all c/PCI Interface Cards unless specified.7) Routing protocols BGP and IGRP are ordered separately.8) Want additional hardware for existing Nokia platform, order from the product from the FieldReplaceable Units section.Software Requirements (Check Point)1) Each Nokia box must contain the same software with the exception of a ManagementConsole Gateway.2) All networks, with at least one Nokia box or any Check Point software, must have at least oneManagement Console Gateway.3) Management Consoles Gateways come in two forms:3a) Single Management Console Gateway (250 & Unlimited users) for one enforcementpoint (covers only one Nokia box).3b) Enterprise Management Console Gateway Unlimited IP type is needed when morethan one Nokia box is managed on the same network.4) Software module is dependent on two factors:4a) Management Console Gateway size (single or enterprise).4b) Software modules are purchased based upon the number of IP addresses on thenetwork. Total IPs, not concurrent users.Support RequirementsAll orders must include the end customer’s site contact: name, company, phone and e-mail on the Purchase Order. Support renewals must include Certification Key number(string of 12 characters) of the existing product on the Purchase Order.We sell Enterasys support for Nokia and Check Point products. When ordering, you should havean Enterasys support part number per Check Point and Nokia (chassis) line item.Example: xxxxxxxxxx-NK-AS-EP-NBD. (“xxxxxxxxxx-” will be Nokia or Check Point part number)The Enterasys support part numbers covers Check Point subscription services and NokiaHardware replacement and support programs.Note: Enterasys support is only needed on the Nokia chassis and not for individualparts (i.e. NICs, etc). Support should be ordered with every Check Point PS* partnumber.