Nokia Intellisync 9.2 Installation Manual

Contents

Nokia Intellisync 9.2 Installation Manual Manual pdf 37 page image

Nokia Intellisync Wireless Email Linux Installation Guide 375 Post-Installation TestingThe following sections provide instructions for testing the system after installation.End User Web SiteUsers can use the Web site to log in, configure their account settings, and install software ontheir device.On the server, open a Web browser and type http://<serveraddress>/. This step validates that theserver is operational and the Web site is available.If you receive an HTTP error, try the following solutions: Check the default Web site port and confirm the port is set to 80. Restart the server.Administrator Web SiteOn the server, open a Web browser and type http://<serveraddress>/admin/. This step validatesthat the server is operational and the Web site is available.If you receive an HTTP error, try the following solutions: Check the default Web site port and confirm the port is set to 80. Restart the server.After you complete these initial tests, the system is ready for user access.Troubleshooting Logon IssuesIf the server does not recognize the account or password, then the logon fails. Make sure youtyped the correct user name (including the domain name) and password, and then try again.If the user name and password are correct but you still cannot log on, ensure that all NokiaIntellisync services are started. For instructions to start Nokia Intellisync services, refer to“Starting and Stopping Services” on page 27.