G e t s t a r t e d16Charge the battery1. Plug the charger into its connector on the GPSmodule. See GPS module parts on page 12.2. Connect the charger to a power outlet. Duringcharging, the green or red indicator light blinks,depending on whether the GPS module is on (green)or off (red).3. When the battery is fully charged and the power is on,the green light is displayed continuously. When thebattery is fully charged and the power is off, the redlight stops blinking. Disconnect the charger from thepower outlet and the GPS module.When the battery is running out of power, the redindicator light on the GPS module starts blinking every 15seconds. Recharge the battery.