Find your model number and serial number (IMEI)If you need to contact your care point or your service provider, you may need info such as the model number and the serialnumber (IMEI). To see the info, tap Settings > about.You can also find the info on your phone label, which is located under the battery.Product and safety infoNetwork services and costsYou can only use your device on the UMTS 850, 900, 1900, 2100; and GSM 850, 900, 1800, 1900 MHz networks. You need asubscription with a service provider.Using some features and downloading content require a network connection and may result in data costs. You may also needto subscribe to some features.Make an emergency callImportant: Connections in all conditions cannot be guaranteed. Never rely solely on any wireless phone for essentialcommunications like medical emergencies.Before making the call:• Switch the phone on.• If the phone screen and keys are locked, unlock them.• Move to a place with adequate signal strength.1. Press , and tap > .2. Type in the official emergency number for your present location. Emergency call numbers vary by location.3. Tap call.4. Give the necessary info as accurately as possible. Do not end the call until given permission to do so.You may also need to do the following:• Put a SIM card in the phone. If you don’t have a SIM, tap emergency call when you get an error message about a missingSIM.• If your phone asks for a PIN code, tap emergency call.• Switch the call restrictions off in your phone, such as call barring, fixed dialling, or closed user group.• When you switch your phone on for the first time, you are asked to create your Microsoft account and set up your phone.To make an emergency call during the account and phone setup, tap emergency call.• If the mobile network is not available, you may also try making an internet call, if you can access the internet.Take care of your deviceHandle your device, battery, charger and accessories with care. The following suggestions help you keep your device operational.• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode electroniccircuits. If your device gets wet, remove the battery, and let the device dry.• Do not use or store the device in dusty or dirty areas.• Do not store the device in high temperatures. High temperatures may damage the device or battery.• Do not store the device in cold temperatures. When the device warms to its normal temperature, moisture can form insidethe device and damage it.• Do not open the device other than as instructed in the user guide.• Unauthorised modifications may damage the device and violate regulations governing radio devices.• Do not drop, knock, or shake the device or the battery. Rough handling can break it.• Only use a soft, clean, dry cloth to clean the surface of the device.• Do not paint the device. Paint can prevent proper operation.© 2015 Microsoft Mobile. All rights reserved. 114