Charge your phone with a USB chargerYour battery has been partially charged at the factory, but you may need to recharge it before youcan switch the phone on for the first time.Make sure you use a compatible USB charger to charge your phone.1. First connect the USB cable to the charger, and plug the charger into a wall outlet, then connectthe micro-USB end of the cable to your phone.2. When the battery is full, disconnect the charger from the phone, then from the wall outlet.You don't need to charge the battery for a specific length of time, and you can use the phone whileit's charging.If your phone is off when you start charging, it automatically switches on.If the battery is completely discharged, it may take several minutes before the charging indicator isdisplayed or before any calls can be made.Tip: You can use USB charging when a wall outlet is not available. Data can be transferred whilecharging the device. The efficiency of USB charging power varies significantly, and it may takea long time for charging to start and the device to start functioning.First connect the USB cable to the computer, then to your phone. When the battery is full, firstdisconnect the USB cable from your phone, then from the computer.© 2013 Nokia. All rights reserved. 7