Nokia M1122 Administrator's Manual
Also see for M1122: User manualUser manual
                                                                                                           | |
Contents
| 
Copyright Nokia Networks OyC33906001SE_00 4-34.2 Step-by-step installation proceduresplitterFigure 4-1 M1122 with cables and splitter (T66270) connected(Telephone and ADSL services)1. Plug the mains power cord to a mains outlet.2. Switch on M1122. The PWR indicator lights up. After a while, thered STA indicator blinks and then remains unlit. M1122 is nowfunctional.3. Connect the Ethernet cable between your PC’s 10Base-Tconnector and the Ethernet connector on the M1122 back panel(ETH-1, ETH-2, ETH-3, or ETH-4).4. Switch on your PC. The indicator corresponding the Ethernet portyou connected your PC to becomes green when your PC hasstarted. This indicator blinks when there is traffic in thecorresponding Ethernet port.5. Connect the ADSL line cable between the DSL connector on theM1122 back panel and ADSL line wall socket. If you want to useADSL and telephone services simultaneously, connect the splitteraccording to Figure 4-1. After a while, the DSL indicator startsblinking. This indicates that the ADSL line is being established.When the DSL indicator remains lit, the line is functional.6. During normal operation PWR and DSL indicators are lit and theEthernet indicators of the active Ethernet ports blink or are litdepending whether there is traffic or not. COL indicator may blinkoccasionally during normal operation. |
Related manuals for Nokia M1122
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine