Nokia Mediamaster 220S User Manual

Nokia Mediamaster 220S User Manual Manual pdf 19 page image

GB 19FIRST TIME INSTALLATIONChannel searchThe Channel search procedure can be performed in differentways.Automatic search• Press OK to start searching for channels.Manual searchThe information you need to enter in this menu is available inmagazines covering satellite TV reception or on the Internet.Transponder frequency: Specify the frequency in GHz with thenumeric buttons. If you enter the wrong value, erase with thebutton.Polarisation: Select Horizontal, Vertical, Circular left or Circularright.Symbol rate: Specify the symbol rate with the numeric buttons.If you enter the wrong value, erase with the button.FEC: Select “Auto” or any of the preprogrammed values.Network search: Select “Yes” if you want to search on all trans-ponders connected to a specific network.• Press OK to start searching for channels.Mini DiSEqC SwitchSelect this alternative if your antenna system has two LNB:s anda Mini DiSEqC Switch (Tone burst).The procedure is the same as for two port DiSEqC as describedon page 17-18.Channel search in progressThis menu will be shown as long as the Mediamaster is search-ing for TV and radio channels.All channels found will be listed on the screen.Please note that the search procedure may take a few minutes.You can cancel the search at any time by pressing OK.When the search procedure has ended, a message will tell howmany TV and radio channels have been found.• Press OK to continue.