Nokia Mediamaster 221 T Owner's Manual

Nokia Mediamaster 221 T Owner's Manual Manual pdf 9 page image

GB 9Connecting the MediamasterConnecting to the TV without SCART• Remove the aerial lead from your TV and connect this to theTV AERIAL input socket on the Mediamaster.• Connect an RF cable from the TV/VCR output on the Media-master to the RF input socket on the TV.• Switch on your TV, plug in and switch on your Mediamaster.• Select a programme number on the TV that is not currentlyused for other TV channels.• Follow the instructions in your TV manual to tune the TV to pickup the First time installation menu.• Follow the instructions in your TV manual to store this chan-nel.• When the First time installation menu is visible, press the se-lect button on the Mediamasters remote control to start theinstallation procedure.If the picture quality is bad you can later change the predefinedUHF channel 43 to any other figure between 21 and 69. You willalso have to tune your TV to the same (= the new) channelnumber. Please see RF modulator output channel setting onpage 20.RFConnecting a HiFi system• Connect an RCA/Cinch stereo cable ( phono ) from the AUDIOL R sockets on the Mediamaster to the LINE, -IN, AUX, SPAREor EXTRA input sockets on your HiFi system.• If available you can connect an RCA/Cinch single cable fromthe DIGITAL AUDIO socket on the Mediamaster to a HiFi sys-tem equipped with digital audio input. This output is also usedfor connection to an external Dolby™ digital decoder.Note: To avoid interference you must use screened audiocables. Never connect digital output to any analogue input.It is always advisable to consult your HiFi instruction book.