Watching TV & listening to the radioGB 14Temporary settingsBy pressing opt, a menu appears that allows you to configure tem-porary settings for the channel that you are currently watching.If you leave the channel and return to it later, the temporary set-tings will be deleted.Audio languageIf available, you can select from the different languages that arecurrently being broadcast.Subtitle languageIf available, you can select from different subtitle languages.TV screen formatIf you have a TV set with a 4:3 picture format, and the transmissionis 16:9, you can select Fullscreen or Letterbox to change the displayformat.• Press opt or back to return to TV/radio mode.TeletextPressing txt will open a teletext page, if teletext is transmitted onthat channel. Select teletext pages using the number buttons onthe remote control (Fig. 1).You can also quickly move to the different page options shown onany page by pressing the cursor left/right button.• After highlighting a page number, press ok to go to that page.• By pressing "0" you can alternate between the last two pagesthat you have most recently viewed.• Press info to hide everything on a teletext page apart from itsheadline.• Sometimes a teletext page may contain subpages. When sub-pages are available, they are numbered in the lower part of thescreen (Fig. 2). To view a subpage, press ok when no page num-bers have been highlighted. Move to the different subpages us-ing the cursor left/right button. NOTE: it may take some timebefore all of the subpages are available for selection.• Press txt/back to return to TV/radio mode.On most new TV sets, you can use the TV's remote control to openand control the teletext functions while watching digital TV chan-nels. (The function is called VBI insertion.)External equipmentUse the 0 (zero) button to toggle between the Mediamaster andany external equipment connected to the SCART, e.g., a VCR or a DVDplayer.Figure 1Figure 2. Subpage numbers