Nokia Mediamaster 9200S Owner's Manual

Nokia Mediamaster 9200S Owner's Manual Manual pdf 22 page image

GB 22Antenna Configuration and Channel SearchThe “Antenna Configuration” line will bring you to the “AntennaConfiguration Set-up” menu. The settings for this menu are al-ready described on page 14.If you select “Channel Search”, you can choose between the“Channel Search set up” described on page 15, SMATV de-scribed on page 15, and “Advanced Channel Search” describedbelow.InstallationSelect this Menu from the line “Installation” in the Main Menu.The submenu will give you the opportunity to change the prefer-ences performed during first time installation. You can also addfeatures that were not included from the first time installation.Please note that helpful information for every line is given at theend of the menu.Installation SubmenusAdvanced Channel SearchThe information to enter in this menu is available in magazinescovering satellite TV reception, or from your Service Provider.Antenna Configuration Name: Select the satellite from whichthe signal is to be received.Transponder Frequency: Enter using the number buttons on theremote control.Polarization: Select Horizontal, Vertical or Auto.Symbol Rate: Select “Auto” or enter with the number buttons.FEC: Enter the appropriate Forward Error Correction (FEC) value.If the PID’s are not described in the transmission you can enterthem here by disable AUTO when pressing the left/right ( )buttons on the remote control on any PID row. If these buttonsare pressed when PID’s are in the transmission, the selectedPID’s can be seen.PID Video:Enter the PID (Package Identifier) for the video signal.PID Audio: Enter the PID for the audio signal.PID PCR: Enter the PID for the PCR (Programme Clock Refer-ence).