Nokia Mediamaster 9650S Owner's Manual

Nokia Mediamaster 9650S Owner's Manual Manual pdf 14 page image

GB 15If you have a TV set with a 4:3 picture format, and the transmission is in 16:9, you can select “4:3(Pan & Scan)” or “4:3 (Letterbox)” to change display format. “4:3 (Pan & Scan)” will fill up thescreen vertically, but cut off some information from the left and right sides of the picture. “4:3(Letterbox)” will give a complete picture, but leave black areas at the top and bottom.You can select the TV screen format in the “System setting” menu which is a subsidiary of the “Userpreference” menu.To start the Mediamaster from stand-by mode, press the “ ” button or one of the numbered buttonson the remote control. It is also possible to start by pressing the button on the front of theMediamaster. Put the Mediamaster into stand-by by pressing again the “ ” button again.In stand-by mode the display will show the correct time. During viewing the channel number will alsobe displayed.Change channel with the numbered buttons or with the up/down buttons on the remote control.You can also use the buttons up/down on the front panel of the Mediamaster.You can also select TV (Radio) channel in the TV (Radio) channel list. See the “List of TV Channel”and “List of Radio Channel” of page 16 and 17.Every time you change channel you will receive information for4-5 seconds about the current programme. This informationincludes: Channel number, name, programme title, and time forpresent and following programmes. Press “i” while watchinga channel. If your Service Provider transmits programmeinformation you will see: Correct time, a small amount ofinformation for the current and next programme, the name andnumber of the channel, and finally the start and finish time for the programme.If you want to get more detailed information, press “i” once more while the information box (banner)is shown. You will get extended information (if transmitted) about the current or next programme.TV Screen FormatStart/Stop Watching TVSelect ChannelProgram Information. The “i” Button