GB 26MAIN MENUAppearance PreferencesBanner time-outWhen you switch channels, an information banner will be shownfor a few seconds. You can select for how long the banner willbe shown.Volume barSelect whether or not you want the volume bar to appear on thescreen when you change the volume.Volume bar time-outSelect how long the banner will be visible on the screen.Parental ControlTo open this menu you will be asked to enter your access code.From the factory the access code is set to 1234.The following settings can be altered from this menu.Receiver lockIf you select “On,” you will have to enter the access code everytime you start the Mediamaster from stand-by.Age Rating ControlIf you want everybody to have access to all available types of pro-grammes, select “Off.”If you select “On,” you may block programmes unsuitable forchildren. Select an age limit between 4 and 18 years on the linethat appears.However, you should be aware that not all Service Providers havethe necessary codes for these functions implemented in theirtransmissions.Change access codeFrom here you can change the access code from the standard1234. DO NOT FORGET IT! Without it you do not have accessto any of the functions where the code is required!SubtitlesSelect whether or not subtitles will be visible on the screen.