CameraTo switch off Self timer, in the active toolbar, select Selftimer > Off.You can also use the self-timer in the sequence mode.Tip! In the active toolbar, select Self timer > 2seconds to keep your hand steady when taking apicture.Record videos1 To activate the main camera, open the slide. If thecamera is in the Image mode, select Switch to videomode from the active toolbar.2 Press the capture key to start recording. In the portraitmode, use the scroll key for recording. The red recordicon is shown and a tone sounds, indicating thatrecording has started.3 Select Stop to stop recording. The video clip isTo zoom in or out of the subject, press the zoom key on theside of the device.To make lighting and color adjustments before recording avideo, use the scroll key to scroll through the activetoolbar. See “Setup settings—Adjust color and lighting”,p. 13 and “Scenes”, p. 13.To free memory before recording a video, select Options >Go to free memory (only available if you have backed upimages or video clips). See “Free memory”, p. 20.To activate the front camera, select Options > Usesecondary camera.Video capture indicatorsThe video viewfinder displays the following:• The current capture mode indicator (1).
