Camera32• To send the image using multimedia, e-mail, Bluetoothconnectivity, or upload it to your online album, pressthe call key, or select Send. For more information, see‘Messaging’, p. 69, ‘Bluetooth connectivity’, p. 59, and‘Online sharing’, p. 42. This option is not availableduring an active call. You can also send the image to acall recipient during an active call. Select Send tocaller (only available during an active call).• To tag images to the Print basket for later printing,select Add to Print Basket.• To print the picture, select Print. See ‘Image print’,p. 41.• To return to the viewfinder to capture a new image,press , or select Back.To use the picture as wallpaper in the active standby, selectOptions > Set as wallpaper.To set the image as a call image for a contact, select Setas contact call image.Still image camera settingsThere are two kinds of settings for the still image camera:Image setup and main settings. To adjust Image setup, see‘Setup settings—color and lighting’, p. 33. The setupsettings return to the default settings after you close thecamera, but the main settings remain the same until youchange them again. To change the main settings, selectOptions > Settings and from the following:Image quality— Print 2M - Large (1600x1200resolution), Print 1M - Medium (1152x864 resolution) orMMS 0.3M - Small (640x480 resolution) If you want toprint the image, select Print 2M - Large. If you want tosend it through e-mail, select Print 1M - Medium. To sendthe image through MMS, select MMS 0.3M - Small.These resolutions are only available in the main camera. Inthe secondary camera, the resolution is always MMS0.3M - Small.Add to album—Select whether you want to save the imageto a certain album in the gallery. If you select Yes, a list ofavailable albums opens.Show captured image—Select On if you want to see thecaptured image after it is taken, or Off if you want tocontinue taking pictures immediately.Default image name—Define the default name for thecaptured images.Extended digital zoom (main camera only)—Select On toallow the zoom increments to be smooth and continuousbetween digital and extended digital zoom. If you want tolimit the zoom to where the selected image quality ismaintained, select Off.