To switch off the device, press the power key briefly,and select Switch off!.Charge the batteryYour battery has been partially charged at the factory.There may not be a need to charge the battery inadvance. If the device indicates a low charge, do thefollowing:Regular charging1. Connect the charger to a walloutlet.2. Connect the charger to the device.The charging indicator light nextto the USB connector is lit whenthe battery is being charged.3. When the device indicates a fullcharge, disconnect the chargerfrom the device, then from thewall outlet.You do not need to charge thebattery for a specific length of time,and you can use the device while it ischarging. If the battery is completely discharged, itmay take several minutes before the chargingindicator appears on the display or before any calls canbe made.Tip: Disconnect the charger from the wall outletwhen the charger is not in use. A charger that isconnected to the outlet consumes power evenwhen it is not connected to the device.USB chargingYou can use USB charging when a wall outlet is notavailable. With USB charging, you can also transfer datawhile charging the device.1. Connect a compatible USB device to your deviceusing a compatible USB cable.The efficiency of USB charging varies significantly.In some cases, it may take a very long time forcharging to start and the device to startfunctioning.2. If your device is switched on, you can select fromthe available USB mode options on the display ofthe device.During extended operation such as an active video calland high speed data connection, the device may feelwarm. In most cases, this condition is normal. If yoususpect the device is not working properly, take it tothe nearest authorised service facility.HeadsetYou can connect a compatible headset or compatibleheadphones to your device. You may need to select thecable mode. 13 Get startedCyanCyan MagentaMagenta YellowYellow BlackBlackCyanCyan MagentaMagenta YellowYellow BlackBlack