Next actionsIf you want to troubleshoot the other bands, change band with RF controls and set the communicationanalyser accordingly.WCDMA transmitter troubleshootingSteps1. Set the phone to local mode.2. In Phoenix, select Testing→WCDMA→TX control .3. In the TX control window, make settings as in the picture:Note: For WCDMA TX channels: band I 9750, IV 1412, VIII 27874. Click Send to enable the settings and activate TX.If settings are changed (eg. new channel), you have to click RF Stop and Send again.5. Check the basic TX parameters using a communication analyzer (for example CMU200).RX-51Cellular RF troubleshootingPage 4 –16 COMPANY CONFIDENTIAL Issue 1Copyright © 2009 Nokia. All rights reserved.
