Set up your deviceInsert the SIM card and batteryAlways switch the device off and disconnect the chargerbefore removing the battery.Important: To prevent damage to the SIM card, alwaysremove the battery before you insert or remove the card.1 To prevent the battery from coming loose, place thedevice so that the back cover is facing up.2 Place your finger in the grip, and lift the back cover up.You do not need to press a button to release the backcover.3 To release the SIM card holder, slide the holder to the left(1), and lift the right end of the holder up (2). Make surethat the bevelled corner on the card is facing up, and thatthe contact area on the card is facing the connectors onthe device (3). Close the holder (4), and slide it to the rightto lock it into place (5).4 Align the contacts of the battery with the correspondingconnectors on the battery compartment, and insert thebattery in the direction of the arrow.5 To replace the back cover, direct the locking catch towardits slot, and press down until the cover locks into place.8 Set up your device