Tools Reject call with SMS—Select Yes to send a text messageto a caller informing why you could not answer the call.See “Answer or reject a call”, p. 27.Message text—Write a text to be sent in a text messagewhen you reject a call.Automatic redial—Select On, and your device makes amaximum of ten attempts to connect the call after anunsuccessful call attempt. To stop automatic redialling,press .Summary after call—Activate this setting if you want thedevice to briefly display the approximate duration of thelast call.Speed dialling—Select On, and the numbers assigned tothe speed dialing keys ( - ) can be dialed by pressingand holding the key. See also “Speed dial a phone number”,p. 26.If you select Line 2 and have not subscribed to thisnetwork service, you will not be able to make calls. Whenline 2 is selected, is shown in the standby mode.Tip! To switch between the phone lines, press andhold in the standby mode.Line change (network service)—To prevent line selection,select Line change > Disable if supported by your SIMcard. To change this setting, you need the PIN2 code.ConnectionData connections and access pointsYour device supports packet data connections ( ), such asGPRS in the GSM network.Glossary: General packet radio service (GPRS) usespacket data technology where information is sent in
