Make calls SettingsPerson-to-person connection settingsA person-to-person connection is also known as a sessioninitiation protocol (SIP) connection. The SIP profilesettings must be configured in your device before you canuse Video sharing. Setting up a SIP profile allows you toestablish a live person-to-person connection to anothercompatible phone. The SIP profile must also be establishedto receive a sharing session.Ask your service provider for the SIP profile settings, andsave them in your device. Your service provider may sendyou the settings over the air.If you know a recipient’s SIP address, you can enter it onyour contact card for that person. Open Contacts fromyour device main menu, and open the contact card (orstart a new card for that person). Select Options > Adddetail > SIP. Enter the SIP address in the format• Ensure that your device UMTS access point connectionsettings are configured properly. For help, see"Connection", on page 105.Share videoTo receive a sharing session, the recipient must installVideo sharing and configure the required settings on theirmobile device. You and the recipient must both beregistered to the service before you can start sharing.To receive share invitations, you must be registered to theservice, have an active UMTS connection, and be withinthe UMTS network coverage.Live video1 When a voice call is active, select Options > Sharevideo > Live.2 The device sends the invitation to the SIP address youhave added to the contact card of the recipient.
