Camerait, select Options > Hide icons. Only the capture modeindicator is shown on the display. To activate the activetoolbar, press the scroll key. To hide it again, press thecapture key half way down.Before taking a picture or recording a video, in the activetoolbar, select from the following:to switch between the video and image modesto select the sceneto select the flash mode (images only)to activate the self-timer (images only). See "You inthe picture — self-timer", on page 40.to activate the sequence mode (images only). See"Take pictures in a sequence", on page 40.to select a color effectto adjust white balanceto adjust the exposure compensation (images only)See also active toolbar options in "After taking a picture",on page 37, "After recording a video", on page 42, and"Active toolbar", on page 45 in Gallery.After taking a pictureAfter you take the picture, select the following from theactive toolbar (available only if Show captured image isset to Yes in still image camera settings):• If you do not want to keep the image, select Delete.• To send the image using multimedia, e-mail, Bluetoothconnectivity, infrared, or upload it to a compatibleonline album, press the call key, or select Send. Formore information, see "Messaging", on page 75,"Bluetooth connectivity", on page 17, and "Onlinesharing", on page 54. This option is not available duringan active call. You can also send the image to a callrecipient during an active call. Select Send to caller(only available during an active call).• To tag images to the Print Basket for later printing,
