Camera52When you take pictures, the default scene is Auto. You canselect the User defined scene as the default scene.To make your own scene suitable for a certain environment,scroll to User defined, and select Options > Change. In theuser defined scene you can adjust different lighting andcolor settings. To copy the settings of another scene, selectBased on scene mode and the desired scene.Take pictures in a sequenceThe sequence mode is available only in the main camera.To set the camera to take six pictures or more in a sequence(if enough memory available), in the active toolbar, selectSwitch to sequence mode > Burst to take six pictures, orthe time period for taking pictures. The number of picturestaken depends on the available memory.To take six pictures, press the capture key. To stop takingpictures, press Cancel. To take more than six pictures, pressand hold the capture key. To stop taking pictures, releasethe capture key. You can capture up to 100 images,depending on the available memory.To use a time period for taking pictures, select Switch tosequence mode, and a time preriod. To start taking pictures,press the capture key. To stop taking pictures before thetime ends, press the capture key again.After you take the pictures, they are shown in a grid on thedisplay. To view a picture, press to open it. If you useda time period for taking pictures, the last taken picture isshown on the display. To view other pictures, press .You can also use the sequence mode with the self-timer.When using the self-timer, the maximum amount ofpictures is six pictures.To return to the sequence mode viewfinder, press thecapture key.You in the picture—self-timerThe self-timer is available only in the main camera.Use the self-timer to delay the capture so that you caninclude yourself in the picture. To set the self-timer delay,in the active toolbar, select Self timer > 2 seconds, 10seconds, or 20 seconds. To activate the self-timer, selectActivate. The quadrangle blinks and the device beeps whenthe timer is running. The camera takes the picture after theselected delay elapses.To switch off Self timer, in the active toolbar,select Self timer > Off.Tip! In the active toolbar, select Self timer > 2 secondsto keep your hand steady when taking a picture.