After capturing an imageAfter you capture an image, select from the followingoptions (available only if you have selected Options >Settings > Show captured image > Yes):● — Send the image in a multimedia or e-mailmessage, or through connection methods such asBluetooth connectivity.● — Upload the image to a compatible onlinealbum.● Delete — Delete the image.To use the image as wallpaper in the home screen,select Options > Use image > Set as wallpaper.To set the image as a default call image to be used forevery call situation, select Options > Use image >Set as call image.To assign the image to a contact, Options > Useimage > Assign to contact.To return to the viewfinder to capture a new image,press the capture key.Flash and video lightKeep a safe distance when using the flash. Do not usethe flash on people or animals at close range. Do notcover the flash while taking a picture.The camera of your device has a dual LED flash for lowlight conditions.To select the desired flash mode, tap the current flashmode indicator, which is one of the following:Automatic, Reduce red, On, and Off.Avoid touching the flash LEDs when the back cover hasbeen removed. The LEDs may get hot after prolongedusage.Video lightTo increase light levels when recording video in lowlight, select .ScenesA scene helps you to find the right color and lightingsettings for the current environment. The settings ofeach scene have been set according to a certain styleor environment.The default scene in image and video modes isAutomatic (indicated with ).To change the scene, select > Scene modes and ascene.To make your own scene suitable for a certainenvironment, scroll to User defined, and select Edit.In the user defined scene you can adjust differentlighting and color settings. To copy the settings ofanother scene, select Based on scene mode and thedesired scene. To save the changes and return to thescenes list, select Back. To activate your own scene,select User defined > Select.104 Camera
