Nokia IP150 Security Platform Installation Guide 11About this GuideThis guide provides information for the installation and use of the Nokia IP150 securityplatform. Installation and maintenance should be performed by experienced technicians orNokia-approved service providers only.This preface provides the following information: In This Guide Conventions This Guide Uses Related DocumentationIn This GuideThis guide is organized into the following chapters and appendixes: Chapter 1, “Overview” presents a general overview of the Nokia IP150 Security Platform. Chapter 2, “Installing a Nokia IP150 Security Appliance” explains how to rack mount theappliance and how to physically connect it to a network and power. Chapter 3, “Connecting to the Ethernet Ports” describes how to connect to the supportedEthernet ports. Chapter 4, “Performing the Initial Configuration” explains how to make the applianceavailable on the network. Chapter 5, “Installing and Replacing Components”describes how to configure and activatethe built-in encryption acceleration feature. Chapter 6, “Troubleshooting” discusses problems you might encounter and proposessolutions to these problems. Appendix A, “Technical Specifications” gives technical specifications such as interfacecharacteristics. Appendix B, “Compliance Information” includes compliance and regulatory information.Conventions This Guide UsesThe following sections describe the conventions this guide uses, including notices, textconventions, and command-line conventions.