PAMSTechnical DocumentationNME–3Installation instructionsPage 3Issue 1 10/99IntroductionThis installation guide has been prepared to provide the basic informationnecessary to install mobile phone. This guide is not intended to be defini-tive, because different types and models of vehicle will require differentinstallation work. The information given is for general guidance only.The terms of warranty demand that this mobile phone be installed by anexperienced installation facility. An end user should never attempt to installthis mobile phone without professional assistance as the installation re-quires special tools and knowledge.Please refer to the phone’s user guide for instructions on the phone’s op-eration, care and maintenance, including important safety information.Note: Read the warnings below before beginning the installation procedure.WARNINGS1. ENSURE THAT THE VEHICLE BATTERY IS DISCONNECTEDBEFORE YOU START THE INSTALLATION PROCEDURE, ANDTHAT IT REMAINS DISCONNECTED DURING THE PROCE-DURE.2. DO NOT SMOKE OR USE OPEN FLAMES WHEN WORKINGNEAR THE VEHICLE’S FUEL SYSTEM.3. ENSURE THAT ELECTRICAL CABLES, HYDRAULIC LINESAND FUEL LINES ARE NOT DAMAGED DURING INSTALLA-TION.4. ENSURE THAT NORMAL CONTROL AND OPERATION OF THEVEHICLE IS NOT IMPAIRED BY THE INSTALLATION, PARTICU-LARLY THE BRAKES AND STEERING.5. ALTHOUGH ELECTRONIC SPEED CONTROL, ABS ANTI–LOCKBRAKE AND FUEL INJECTION SYSTEMS ARE RELATIVELY IM-MUNE TO MALFUNCTION CAUSED BY NEARBY RADIOTRANSMISSIONS, SHOULD YOU EXPERIENCE FALSE OPERA-TION OF THESE SYSTEMS OR BE IN ANY DOUBT WHATSOEV-ER AS TO THEIR FUNCTIONALITY, PLEASE CONSULT THE VE-HICLE DEALER.6. THE MOBILE PHONE IS SUITABLE FOR USE ONLY IN VE-HICLES WITH A 11..16 V NEGATIVE GROUNDING. USE ONOTHER SUPPLY VOLTAGES OR ALTERNATIVE POLARITYWILL DAMAGE THE EQUIPMENT.7. THE PHONE SHOULD NOT BE LEFT SWITCHED ON FOR EX-TENDED PERIODS WITHOUT RUNNING THE VEHICLE’S EN-GINE. FAILURE TO COMPLY COULD DRAIN THE VEHICLE’SBATTERY.