Nokia NSERIES N78 Get Started

Also see for N Series: User guide Manual Manual Software guide User guide

Contents

Nokia NSERIES N78 Get Started Manual pdf 6 page image

8 Copyright © 2008 Nokia. All rights reserved. Copyright © 2008 Nokia. All rights reserved. 9basic phone set-up basic phone set-upCharge the batteryConnect a compatible charger toa wall outlet.Connect the power cord to thedevice. If the battery is completelydischarged, it may take a whilebefore the charging indicator startsscrolling.When the battery is fully charged, the charging indicatorstops scrolling. Disconnect the charger from the device,then from the wall outlet.Tip: Disconnect the charger from the wall outlet when thecharger is not in use. A charger that is connected to the outletconsumes power even when it is not connected to the device.Lock the keypadTo lock the keys, press the left selection key, followed by .To unlock the keys, press the left selection key, followed by .You can set the keypad to lock automatically after a time-out.To illuminate the keypad in low light conditions, briefly pressthe power key.Wrist strapRemove the back cover.Thread a strap as shownand tighten it.Replace the cover.231231Display indicatorsThe device is being used in a GSM network(network service).The device is being used in a UMTS network(network service).You have one or more unread messages in theInbox folder in Messaging.You have received new e-mail in the remote mailbox.There are messages waiting to be sent in theOutbox folder.You have missed calls.The ringing type is set to silent, and the messagealert tone and e-mail alert tone are set to off.A timed profile is active.The device keypad is locked.A clock alarm is active.The second phone line is being used (network service).All calls to the device are diverted to another number(network service). If you have two phone lines,a number indicates the active line.A compatible microSD card is in the device.A compatible headset is connected to the device.A compatible text phone is connected to the device.A GPRS packet data connection is active (networkservice). indicates the connection is on hold andthat a connection is available.