                 | |
OverheatingCapture or broadcast will stop onoverheatThe Device is protected againstoverheating by switching to standbywhen the temperature of the deviceexceeds a set limit (A).Switching to standby discontinues anykind of capturing because the sensorsare powered down.If the temperature continues torise even after switching to standbya second threshold triggers fullshutdown (B).Do not use near heat sources.These may cause the device tooverheat, and stop capture.Operating and Storage TemperatureOperating TemperatureThe device should only be usedbetween +32°F and +77°F (0°C and+25°C). Do not use outside this range.Storage TemperatureThe device should be stored between-4°F and +122°F (-20°C and +50°C).Do not store outside this range.98+32°F / +77°F 0°C / +25°C-4°F / +122°F -20°C / +50°CBA |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine